Tools

Park Tool CC-3.2 Chain Wear Indicator

$10.69

A worn chain shifts poorly and wears sprockets at an accelerated rate. The CC-3.2 is a go-no go gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. Learn More

| Add to Compare

Park Tool CCP-22 Crank Puller - For Square Taper Cranks

$15.29

The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Learn More

| Add to Compare

Park Tool CCP-44 Crank Puller - For Splined Octalink and ISIS Drive Cranks

$15.89

The CCP-44 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Learn More

| Add to Compare

Park Tool CCW-5 Crank Bolt Wrench: 14mm, 8mm

$11.29

The CCW-5 features both a 14mm socket and 8mm hex wrench on a long, comfortable handle. Learn More

| Add to Compare

Park Tool CF-2 Heavy Duty Cutting Fluid: 8 oz. (237 mL)

$11.69

A quality cutting fluid should be used when performing any cutting, tapping, facing, threading, or reaming procedure. Learn More

| Add to Compare

Park Tool CG-2.2 Chain Gang Chain Cleaning System

$34.95

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. Learn More

| Add to Compare

Park Tool CM-5.2 Cyclone Chain Scrubber

$26.49

Keeping your chain clean is an essential part of good bike maintenance. The CM-5.2 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean. Learn More

| Add to Compare

Park Tool CN-10 Cable and Housing Cutter

$37.95

The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. Learn More